Learn by doing, one sample at a time
Every tutorial starts from a sample that comes with the program and ends with a result you can check. Pick your product.
FEA Studio
Install and sign in
Download the setup, sign in with your invited email, and open a sample.
Start →Build the model
Start from a template or draw on grid lines; assign sections, materials and supports.
Start →Loads and code combinations
Add load cases and generators, and let the code make the combinations.
Start →Run an analysis and read the results
Add a study, solve it, then read contours, member forces and reactions.
Start →Design every member with one button
Run Design…, read the D/C colours and open a member’s calculation.
Start →Drawings and the calculation report
Pick a drawing standard, make the sheets and generate the report.
Start →FEA Offshore
Run your first offshore sample
Open the four-leg jacket sample, run it and read the results.
Start →Fixed jacket platform
Environment, current, marine growth, design wave, soil and piles, then the API RP 2A checks.
Start →Offshore wind monopile
1P/3P natural frequency, the design wave, a storm in time domain, and the ISO 19902 check.
Start →Moored floating body
Mooring lines on their catenary, a BEM hull, static pretension and the hull in waves.
Start →Floating wind turbine with OpenFAST
The OC4 DeepCwind sample with the rotor, a run in OpenFAST, and IEA 15 MW RAOs.
Start →Wave energy converter power
The RM3 sample: PTO power, RAOs, the power matrix and annual energy.
Start →FEA OpenSees Building
Set up OpenSees and open the sample building
Point the program at your OpenSees.exe and open the seismic assessment sample.
Start →Gravity, then pushover
The capacity curve, hinges as they form, and acceptance at IO, LS and CP.
Start →Ground motions and nonlinear time history
Generate and scale records, run them, and read drifts and the base shear.
Start →IDA and collapse fragility
Scale a record up to collapse and read the IDA curves and the fragility.
Start →Progressive collapse and its playback
Remove members as they fail and play the collapse back through time.
Start →The KDS seismic evaluation report
Generate the seismic evaluation report and its Korean volumes.
Start →FEA OpenSees Bridge
A girder bridge from a template
Start the multi-span overpass and set its spans, deck and piers.
Start →Edit components one by one
Change one girder, pier or bearing and copy it to the others.
Start →Bearings and abutments
Give the bearings and abutments the behaviour the analysis uses.
Start →Pier pushover with fibre sections
Push the bridge to a target drift and see where the piers yield.
Start →Time history with multi-support excitation
Ground motions that reach each support at its own time.
Start →The AASHTO / Caltrans capacity check
Displacement demand against capacity, pier by pier, and the bridge seismic report.
Start →FEA Viewer
Your first model
Open a sample, find your way around and colour it by displacement.
Start →MIDAS and ETABS models
The Works tree, result tables, modes, diagrams and the analysis log.
Start →Abaqus jobs
.inp, .cae and .odb files, stresses, frames and job messages.
Start →IFC and Revit models
Storeys, property sets, plan views and the clipping box.
Start →OpenSees, OpenFAST and VTK runs
Play runs through time and read their channels.
Start →