Pick a girder
Open the overpass from the first tutorial. If it has results, choose Results › Unlock model first: the template is rebuilt by its parameters, and a model with results is locked.
In the 3D view, click the outer girder of span 1. The Template panel shows the selected component with its own values, grouped as Section and End blocks.
Components exist on the eight girder bridges: girders, diaphragms, bearings, piers and abutments. The truss, arch, box, cable-stayed and suspension templates have parameters only.
Choose where the change goes
Changes apply to sets which girders a change reaches. For a girder the choices are:
| Choice | Reaches |
|---|---|
| This girder (G1, span 1) | Only the girder you clicked |
| G1 in every span | The same girder line in all spans |
| Every girder of span 1 | All girders of that span |
| Every exterior girder | The outer girders of every span |
| Every girder | All girders |
Choose Every exterior girder. Select them highlights those girders in the 3D view.
When you select several girders, the first choice is The n selected girders, followed by the broader scopes that hold all of them.
Change the girder section
Set Girder section to a deeper section from the library, for example AASHTO BT-72. The dimensions below it go back to that section’s values.
The bridge is rebuilt. Changed values are marked in the panel, and their tooltip gives the template’s value. The line under the parameters counts the component changes.
When one value changes, the most specific change wins. A change made for every girder removes the same property from narrower changes inside it.
Copy a change to similar girders
- Click an interior girder of span 2 and set Changes apply to to This girder.
- Under End blocks, change a value, such as End block length.
- Under Copy the changes of this girder to, choose a button such as Every girder of span 2. The values you changed are given to those girders.
Change one pier
Click a column of pier P2. The whole pier is picked: cap, columns, footing or pile cap, and piles.
| Group | Property | Value |
|---|---|---|
| Changes apply to | This pier (P2) | |
| Column | Column shape | Rectangular |
| Bent cap | Depth D1 | 1600 mm |
| Foundation | Pile rows | 3 |
A pier has the groups Bent, Bent cap, Column and Foundation. Its skew is the skew of its support line.
Diaphragms work the same way: choose a diaphragm and turn Present off to leave it out, or change its thickness and depth.
Reset changes
- Reset to template removes the changes of the chosen scope and the narrower ones inside it.
- Reset all, beside the count of component changes, puts every girder, pier and bearing back to the template parameters.
- Each change is one undo step.
What you learned
- Click a part in the 3D view to edit it in the Template panel.
- Changes apply to sends a change to one part, a line, a span or all of them.
- A change on one part can be copied to the similar ones.
- Clicking a pier column picks the whole pier.