Open the RM3 sample
- Click File › Samples and choose RM3 wave energy converter.
The DOE Reference Model 3 (RM3) is a Ø 20 m float heaving against a spar with a Ø 30 m heave plate. Its BEM data are WEC-Sim's WAMIT coefficients, bundled as builtin:rm3.h5. The Explorer's Offshore folder lists both bodies, Body float and Body spar.
| Item | In the sample |
|---|---|
| Water depth / density | 100 m / 1000 kg/m³ (as the BEM data) |
| Bodies | float (CoG z −0.72 m) and spar (CoG z −21.29 m) |
| PTO | Linear, 1200 kN·s/m, on the relative heave of float and spar |
| Sea states | Regular wave: Airy, H 2.5 m, T 8 s; Irregular sea: JONSWAP, Hs 2.5 m, Tp 8 s, γ 3.3 |
| Studies | Dynamic (regular, 120 s); RAO; Dynamic (irregular, 600 s) |
Look at the power take-off
To add a PTO to your own model, click Offshore › Renewables › PTO. It needs at least one floating body.
| Field | Meaning |
|---|---|
| Body | The body that moves the PTO |
| Reacting against | Another body, or the seabed |
| Point X Y Z / Axis X Y Z | Where the PTO acts and along which axis |
| Type | Linear, or Hydraulic (force limit) |
| Damping / Stiffness | kN·s/m and kN/m |
| Force limit, hydraulic | kN |
Measure the power in regular waves
- In Explorer › Studies, select the first Dynamic study (regular wave, 120 s, 0.02 s steps) and press F5.
- Open the Chart and choose PTO power. The note under the chart gives the mean power over the second half of the record.
- Choose Offshore to see the heave of the float and the spar.
This case was compared with WEC-Sim's regression run of the same model: float and spar heave and the PTO power agree within about 1 %.
Solve the RAOs
The RAO study works in the frequency domain and includes the PTO damping and stiffness.
- Select the RAO study and press F5 (or Offshore design › RAO).
- Open the Chart and choose RAOs.
Make the power matrix
The power matrix gives the mean absorbed power for each pair of Hs and Tp. It needs the RAO results to be shown.
- Click Offshore design › Power matrix.
- Check the fields below and confirm.
| Field | Value |
|---|---|
| Power take-off | PTO |
| Hs values (m) | From the sample's scatter diagram: 0.75 1.25 1.75 2.25 2.75 3.25 |
| Tp values (s) | 5 7 9 11 13 |
| JONSWAP γ | 3.3 |
The window shows a chart of power against peak period for each Hs, the table of mean power in kW, and, because the sample has a scatter diagram, the annual energy in MWh.
Linear estimate
The power matrix is linear and in the frequency domain. The hydraulic force limit and viscous drag are not in it. Check important sea states with a Dynamic study.
Edit the scatter diagram
The annual energy weights the power matrix by how often each sea state occurs.
- Click Offshore design › Metocean.
- Enter the direction, its probability and the scatter table: the first row holds the Tp values, then one row per Hs with its counts.
- Run Power matrix again.
Check in an irregular sea
- Select the second Dynamic study (irregular sea, 600 s, 0.05 s steps) and press F5.
- Compare the mean of PTO power with the power matrix value at Hs 2.5 m, Tp 8 s.
To try a hydraulic PTO, change its type to Hydraulic (force limit). The force limit acts in the time domain only; the RAO uses the linear damping.
What you learned
- A PTO joins a body to another body or to the seabed.
- Chart › PTO power gives the absorbed power of a Dynamic run.
- Power matrix uses the RAO results and the scatter diagram for the annual energy.